Ball Bearing Slides - 35mm

• To install mini telescopic slide 12.7 to 13.0mm side gap per side is required between cabinet and drawer (Ref. Fig. 1)
• Depress latch and remove the inner slide (Ref. Fig.2)
• Fit outer (fixed) slide onto the inside of the cabinet, access to holes can be got through slots in intermediate slide.
• Slides should be fitted parallel and screws tightened fully to avoid gaps.
• Fit inner slide onto the outside of the drawer.
• Now slide the drawer with inner slide engaged on to the intermediate slides on the cabinet till the latch will automatically engage.

For efficiency and durability:

• Strictly maintain 12.7 to 13.0mm side gap.
• Fit slides parallel and at equal heights.
• Do not apply paint or polish.
• Do not let saw dust enter into the slides