Ball Bearing Slides - 35 kg
- Precision ball bearing.
- Full extension of drawer.
- Load capacity of 35kgs.
- Direct fitting from front.
- Removable drawer with latch.
- System 32 Installation.
Code Nos. | Extension | Max Load | Finish |
2/1/STDS 25 | 260 | 35 | Zinc White/ Zinc Black |
2/1/STDS 30 | 310 | ||
2/1/STDS 35 | 360 | ||
2/1/STDS 40 | 410 | ||
2/1/STDS 45 | 460 | ||
2/1/STDS 50 | 510 | ||
2/1/STDS 55 | 560 | ||
2/1/STDS 60 | 610 |
- To install ball bearing slide, 12.7 to 13.0 mm side gap per side is required between cabinet and drawer (Ref. Fig. 1)
- Depress latch and remove the inner slide (Ref. Fig.2)
- Fit outer (fixed) slide on to the inside of the cabinet, access to holes can be got through slots in intermediate slide.
- Slides should be fitted parallel and screws tightened fully to avoid gaps.
- Fit inner slide onto the outside of the drawer.
- Now slide the drawer with inner slide fitted on to the intermediate slides on the cabinet till the latch will automatically engage.
Item | Item Code | Pcs/Set | Inner Packing | Outer Packing | |||
Qty (Nos/Set) | Weight (Kgs) | Qty (Nos/Set) | Weight (Kgs) | Box Size(mm) | |||
Ball Bearing Slides - 35 kg | 2/1/STDS25 | Set of 2 Pcs. | 10 Set | 6.25 | 40 Set | 25 | 425 x 285 x 185 |
2/1/STDS30 | Set of 2 Pcs. | 10 Set | 7.5 | 40 Set | 30 | 425 x 330 x 171 | |
2/1/STDS35 | Set of 2 Pcs. | 10 Set | 8.75 | 40 Set | 35 | 425 x 381 x 171 | |
2/1/STDS40 | Set of 2 Pcs. | 10 Set | 9.66 | 30 Set | 28.9 | 430 x 215 x 255 | |
2/1/STDS45 | Set of 2 Pcs. | 10 Set | 11 | 30 Set | 33 | 480 x 215 x 255 | |
2/1/STDS50 | Set of 2 Pcs. | 10 Set | 12.5 | 20 Set | 25 | 530 x 420 x 100 | |
2/1/STDS55 | Set of 2 Pcs. | 10 Set | 14.5 | 20 Set | 29 | 570 x 420 x 95 | |
2/1/STDS60 | Set of 2 Pcs. | 10 Set | 15 | 20 Set | 30 | 630 x 420 x 95 |
For efficiency and durability:
- Strictly maintain 12.7 to 13.0mm.
- Fit slides parallel and at equal heights.
- Do not apply paint or polish.
- Do not let saw dust enter into the slides.
$0.00